Sub-Zero 427RG Anti-Tip Bracket Installation, MODEL 424G, MODEL 424FSG, Anti-tip bracket 424FSG

Models 424G and 424FSG Installation 8

Anti-Tip Bracket Installation

To prevent the unit from tipping forward and provide a stable installation, the unit must be secured in place with the anti-tip bracket.

An anti-tip bracket and hardware is provided with the wine storage unit. The anti-tip bracket must be installed on a solid base to prevent tipover in case several loaded wine shelves are extended at the same time.

MODEL 424G

The anti-tip bracket should be attached to the wall behind the unit with the bracket flange located immediately above the top of the unit. Refer to the illustration below.

For installations that cannot accommodate the anti-tip bracket, the optional countertop bracket (provided) can be used to secure the model 424G. This bracket will secure the front of the unit to the underside of the countertop, above the unit. Refer to the illustration below. If it is not possible to use the countertop bracket, wedge shims along the sides and top of the unit to secure.

MODEL 424FSG

If you are installing the model 424FSG in a space deeper than 245/8" (625), the anti-tip bracket must be installed no more than 245/8" (625) deep, so it engages the unit properly. It is important that this measurement be made from the front surface of the door, to the back of the anti- tip bracket. Refer to the illustration below.

ANTI-TIP BRACKET

Anti-tip bracket (424FSG).

ANTI-TIP

BRACKET

1/4" (6)

COUNTERTOP

BRACKET

Anti-tip bracket (424G). Countertop bracket