Models 424G and 424FSG Installation | 11 |
Level the Unit
Using an adjustable wrench or pliers, turn each of the four leveling legs clockwise to raise the unit and counterclock- wise to lower the unit. Refer to the illustration below for location of the leveling legs.
For model 424G, the countertop bracket should be used to make a solid installation. Refer to the illustration on page 8. If this is not possible, wedge shims along the sides and top.
To reduce the possibility of the unit tipping forward, the front leveling legs must be in contact with the floor.
subzero.com
Home Alarm Connections
Before the kickplate is installed, all necessary wiring connections in the compressor compartment should be completed.
If a home alarm system is to be installed on the wine storage unit, the connections should be made using the logic supplied with the alarm specifications. Refer to the illustration for the appliance lead locations, and refer to the following for color codes:
•Normally open contacts – white with red stripe wire
•Normally closed contacts – white with blue stripe wire
•Common – gray with white stripe wire
Use the 1/4" spade terminals or wire nuts provided to make the proper wiring connections.
LEVELING LEGS |
HOME ALARM |
CONNECTIONS |
IMPORTANT NOTE: If you are not responsible for alarm system connection, this information should be supplied to the home security system contractor.
The alarm circuit in the unit is intended as a low- voltage,
Any unused terminals should be completely insulated and all wires should be secured away from conductive or moving components.
Leveling legs. | Home alarm connections. |
