Models 424G and 424FSG Installation | 15 |
Hinge Adjustment
IMPORTANT NOTE: The wine storage unit must be installed and leveled before door hinge adjustments can be made.
The top and bottom cabinet hinges on models 424G and 424FSG are held in place with three permanent adjust- ment screws and two shipping screws. Refer to the illus- trations below. The shipping screws must be removed and discarded to adjust the door alignment and fit. If no adjustments are necessary, it is recommended that all five screws remain in place.
On the model 424FSG, only the bottom door hinge can be adjusted. Remove and discard the two shipping screws and loosen the three hinge screws to adjust the door.
TOP DOOR HINGE |
SHIPPING |
SCREWS |
BOTTOM |
DOOR HINGE |
SHIPPING |
SCREWS |
Top hinge. | Bottom hinge. |
subzero.com
Complete the Installation
When you have completed installation of the model 424G or 424FSG wine storage unit, refer to page 54 for an installation checklist and page 55 for service information.