Sub-Zero 427RG, 427G, 424FSG, 424G manual Model WS-30 Installation, Electrical Requirements, From

Model WS-30 Installation 36

Electrical Requirements

For model WS-30, the electrical supply should be located within the shaded area shown in the illustration. Follow the National Electrical Code and local codes and ordinances when installing the receptacle. A separate circuit, servicing only this appliance is required. A ground fault circuit inter- rupter (GFCI) is not recommended and may cause inter- ruption of operation.

The outlet must be checked by a qualified electrician to be sure that it is wired with the correct polarity and is properly grounded.

Do not use an extension cord or two-prong adapter. Electrical ground is required on this appliance. Do not remove the power cord ground prong.

Electrical Requirements

Power Supply	115 V AC, 60 Hz
Circuit Breaker	15 amp
Receptacle	3-prong grounding-type

FRONT VIEW

7"	E
(178)
	6"
	(152)
751/2"
(1918)
FROM
FLOOR

Location of electrical supply.