Sub-Zero 424G, 427G Overlay Panel Specifications, Grille Panel Assembly, Model WS-30 Installation

Model WS-30 Installation 47

subzero.com

Overlay Panels

GRILLE PANEL ASSEMBLY

Remove the grille panel assembly as described on page

39.Remove the top two corner screws and pull away the top frame. Slide the panel into position in the grille frame. If you are using a grille panel 1/4" (6) or thinner, you will need to install a filler.

Reattach the top frame by reinstalling the two top corner screws. Install the grille panel assembly onto the unit, by reversing the grille removal procedure outlined on page 39.

Refer to specifications for overlay grille panels and the illustrations on the previous page for the exact sizing of all three panels.

Do not exceed the panel dimensions listed for the appropriate overlay grille panel you are specifying. The overlay decorative panel cannot be any larger or it may restrict the air flow to the compressor area and cause problems with the operation of the Sub-Zero unit.

A solid panel cannot be installed over the glass door, as this may cause moisture to form behind the panel.

Overlay Panel Specifications

	H
	A
A	A
	H
	A
	W

Model WS-30

DOOR	W	H
Overlay Panel	30" (762)	693/4" (1772)
Spacer Panel	291/8" (740) 6815/16" (1751)
Backer Panel	293/4" (756)	699/16" (1767)
GRILLE	W	H
Overlay Panel	30" (762)	91/4" (235)
Spacer Panel	291/8" (740)	85/16" (211)
Backer Panel	293/4" (756)	815/16" (227)
WINDO W	W	H
Cut-Out	231/2" (597)	631/4" (1607)
		A
Location		31/4" (83)

Grille panel dimensions listed are for a standard 84" (2134) overall height of the unit. For an 83" (2108) overall height, subtract 1" (25) from grille panel height dimensions. For an 88" (2235) overall height, add 4" (102) to height dimensions. Width dimensions do not vary.