Sony HVR-V1E BON, OFF, HIGH, LINEAR, ATW SENS, MIDDLE LOW, SHOT TRANS, BSOFT STOP, HANDLE ZOOM, xTRANS TIME, BINTELLIGENT, FLCKR REDUCE, xTRANS CURVE

Press the MENU button t select the (CAMERA SET) by turning the SEL/PUSH EXEC dial.

bNote

•If you adjust the iris manually, you cannot obtain the effect of [AT IRIS LMT].

ATW SENS

You can set the auto white balance operation under a reddish light source such as an incandescent lamp or candle, or under a blueish light source such as in outdoor shade.

BINTELLIGENT

Adjustment is automatically performed to achieve a natural atmosphere according to the brightness of the scene.

HIGHRedness or blueness will decrease.MIDDLE LOW

HANDLE ZOOMYou can change the zoom speed of handle zoom switch positions H and L (p. 37).

xH

You can select the zoom speed of position H of the handle zoom switch from 1 (slow) through 8 (fast) (the default setting is 6).

xL

You can select the zoom speed of position L of the handle zoom switch from 1 (slow) through 8 (fast) (the default setting is 3).

SHOT TRANS

You can set [TRANS TIME], [TRANS CURVE], [START TIMER] and [REC LINK]. See page 52 for details on using the shot transition function.

Redness or blueness will increase.

bNotes

•This is only effective when white balance is adjusted automatically.

•[ATW SENS] is not effective under a clear sky or the sun.

FLCKR REDUCEBON

Select to record under normal conditions. Flickering of the screen under a light source such as fluorescent lamps will be reduced.

xTRANS TIME

You can select transition time ([3.5sec] to [15.0sec], the default setting is [4.0sec]).

xTRANS CURVE

You can select the transition curve. The transition curve changes as follows. *1: parameter level

*2: transition of timeLINEARMake the transition linearly.

*1

OFF

Select when you do not want to reduce flickering of the screen.

bNote

•Flickering may not be reduced depending on the light sources.

*2

BSOFT STOPMake the transition slowly at the end.

*1

*2

72