QUESTIONS AND ANSWERS

1.How can I permanently change a part of my program?

Press PRGMVIEW and ADVDAY until you reach the time/temperature schedule you want. Then

press or and TIMEFWD and BACKTIME to change the program. See PROGRAM-

MING YOUR THERMOSTAT.

2.How can I finish my programming if the display has already changed to time/ temperature?

During programming, if no buttons are pressed for five minutes, the thermostat will enter the HOLD mode and maintain a constant temperature. The display will change to the time/temperature mode. To

resume programming, press PRGMVIEW and ADVDAY

until you return to the point where you stopped programming. Then you may con- tinue to program the thermostat normally. If you want to stop programming at this

point, press PRGMRUN to start the normal pro-

gram function. See PROGRAMMING YOUR THERMOSTAT.

3.What happens if the electricity goes off or is manually shut off?

If you have not installed a 9 volt alkaline battery, the display will go blank and the program will be lost in five seconds. When

electricity is restored, the thermostat will maintain a heating temperature of 64°F and a cooling temperature of 82°F until you

32

Page 32
Image 32
White Rodgers 1F95-80 manual How can I permanently change a part of my program?, Ming Your Thermostat