etc. is displayed, and press PRGMRUN to begin the factory preset program. Or you may reprogram the thermostat, then replace it on the wall.
To prevent further static discharge prob- lems, touch another object to release static
6.Why won’t the setpoint temperature go to the temperature I want?
The highest heating setpoint temperature you select must be at least 1°F lower than
the lowest cooling setpoint temperature you select (for example, if 70°F is your lowest selected cooling temperature, you
cannot select a heating temperature any higher than 68°F). If such a conflict exists, you must set the lowest cooling tempera-
ture higher in order to set the heating temperature higher. To set a lower cooling temperature, you must select a lower heat- ing temperature. See PROGRAMMING YOUR THERMOSTAT.
7.Why doesn’t the display light come on when I press a button? Why don’t I hear a beep when I press a button?
The display light and audio prompting (beep) only work when the thermostat is on the wall and 24VAC power is present to the thermostat. These features will not work on battery power alone. See OPERATING YOUR THERMOSTAT.
34
