Technical specifications

General

Power Requirements

100/115V or 230V AC,

 

set by voltage selector switch on rear panel

Power consumption

< 35 VA

Dimensions

435mm x 80mm x 350mm

Weight

net: 5.2kg; packed: 8.0kg

Video outputs

 

Composite video

1 x gold plated phono. 1V pk-pk in 75Ω

S-Video

1 x 4-pin mini-DIN. Y 1V pk-pk in 75Ω, C 0.3V pk-pk in 75Ω

Component video

Interlaced or Progressive

 

3 gold plated phono sockets.

 

Y 1V pk-pk in 75Ω, Pb 0.7V pk-pk in 75Ω, Pr 0.7V pk-pk in 75Ω

SCART socket with RGB video

All 0.7V in 75Ω, composite video 1V in 75Ω, and stereo audio

 

Auto switching of TV with aspect ratio control

HDMI

19-pin HDMI connector

 

Supported video formats are:

 

720x576p, 720(1440)x576i, 720x480p, 720(1440)x480i,

 

all with basic audio.

Audio outputs

 

Analogue audio outputs

Stereo or multi-channel output on gold-plated phono sockets

Output level

2.2V rms at 0dB signal,

 

4V rms with HDCD discs (left and right channels only)

Frequency response

20Hz to 20kHz (+0.1db, –0.5dB)

THD+N

<0.005% for 1kHz 0dB signal,

 

measured 22Hz–22kHz, unweighted

Signal-to-noise ratio

105dB, measured 20Hz–20kHz, unweighted

Digital audio output (IEC958)

PCM/Dolby digital/MPEG/DTS on gold plated phono (coax) and

 

TOSLINK (optical)

Accessories supplied

 

 

CR-415 Remote control

 

2 x AAA batteries

 

mains lead

E&EO

 

NOTE: All specification values are typical unless otherwise stated.

Continual improvement policy

Arcam has a policy of continual improvement for its products. This means that designs and specifications are subject to change without notice.

English

DV79

E-25

Page 25
Image 25
Arcam DV79 manual Technical specifications, Continual improvement policy