Arcam DV79 manual Hdmi interface, About Hdmi, Connecting using Hdmi, Troubleshooting

The HDMI interface

If you have a HDMI- or DVI-equipped monitor or display, you can connect it to the DV79 using a HDMI cable. The HDMI connector carries uncompressed digital video, as well as digital audio.

About HDMI

HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, digital TV, set-top boxes, and other AV devices. HDMI was developed to combine the technologies of High-bandwidth Digital Content Protection (HDCP) and the Digital Visual Interface (DVI) in one specification, with the addition of transmission of digital audio information; HDCP is used to protect digital content transmitted to DVI-compliant displays.

HDMI has the capability to support standard (interlaced), enhanced, or high-definition video together with stereo or multi-channel surround-sound audio. HDMI features include uncompressed digital video, one connector (instead of several cables and connectors), and communication between the AV source and AV devices.

Connecting using HDMI

If the HDMI connector is to be used, we recommend first setting the ‘Output Priority’ item on the video menu page to ‘HDMI/DVI’. This will give full ‘plug and play’ functionality. See page 14 for details on how to do this.

Use a HDMI cable to connect the HDMI socket on this player to a HDMI socket on a compatible display device or receiver. The arrow on the cable connector body should be face up for correct alignment with the connector on the DV79. If the DV79 has been configured to ‘HDMI priority’, then the DV79 will configure its video output automatically to match the capabilities of the attached HDMI device. If the connection was successful, ‘HDMI’ or ‘DVI’ is shown briefly via the on-screen display according to the compatibility of the connected component.

NOTE: A HDMI connection can be made only with HDMI or DVI-equipped components compatible with both DVI and HDCP. Note that if you choose to connect to a DVI device, you will need an adaptor (HDMI to DVI) to do so; a DVI/HDCP connection, however, does not support audio signals.

If you require further information on the possibilities for connecting your DV79 to your DVI/HDMI equipped display device, please contact your Arcam dealer.

Troubleshooting

Problems with video

NO VIDEO (BLANK SCREEN)

nCheck that the HDMI cable is connected correctly at both ends. If an HDMI-equipped A/V receiver is in use, try connecting the DV79 directly to the display device, in order to isolate where the fault may lie.

nCheck that the display device is set to display the HDMI input (i.e., has not been set to some other video input, instead).

nCheck that the HDMI connector of the receiver and/or display device is enabled. See the user handbook of the connected device for details on doing this.

nUsing an alternative video display device (e.g., connected via the composite video out), check that the ‘Output Priority’ item on the Video page of the Set-up menu is set to ‘HDMI / DVI’. See page 14 for details on how to do this.

nConsult the user handbook of the display device to ensure that it can handle the output formats provided by the DV79. The DV79 can provide the following: 720x480P (NTSC progressive scan), 720(1440)x480i (NTSC interlaced), 720x576P (PAL progressive scan) and 720(1440)x576i (PAL interlaced). At least one of these must be supported by the connected device in order for it to work with the DV79.

NO VIDEO (RANDOM NOISE)

Random noise will be displayed if the content-protection algorithm fails to authenticate the attached device. This will occur, for example, if a DVI device that does not support HDCP (such as a computer monitor) is connected to the DV79.

To attempt to isolate this problem, remove all discs from the DV79, the power-off both it and the connected display device. Switch the display device on, then the DV79 – at this point, the idle logo of the DV79 should be shown on the display device. If this is not the case, please check the items listed above for a blank screen.

If the noise appears when a copy-protected disc (DVD) is played, then it is the authentication that is failing. Please contact your dealer for further information.

Problems with audio

The audio provided by the HDMI connector is the same as that provided through the SPDIF socket. Note that pure DVI devices (connections requiring a HDMI to DVI convertor cable) do not support audio via this connection.

If you have a HDMI device, try setting the audio output to Audio item of the Set-up menu to ‘PCM/2 Ch.’; it may be that the display device supports only 2-channel audio.

English

DV79

E-9