setpoint display is blank in the AUTO mode). The system will now automatically switch between heating and cooling depending on the actual room temperature.
NOTE
If the thermostat is configured for automatic changeover, the thermostat will not allow the temperature separation between the highest heat setting and the lowest cool setting to be less that 1°F. For example, if the highest heat setting is 76°F, the lowest cool setting cannot be below 77°F (see diagram below).
•TWO HOUR TEMPERATURE OVER-
RIDE — Press 
or 
until the display shows the temperature you want. The thermostat will override current pro- gramming and keep the room temperature at the selected temperature for two hours. After two hours, the thermostat will auto- matically revert to the program.
NOTE
This feature will not work in the AUTO mode. Therefore, we do not recommend using the temperature override feature when the thermo-
79
78
COOLING TEMPERATURES
stat is in the AUTO mode. Pressing 
or 
in the AUTO mode will cause the thermo-
77
76
DEAD BAND 1°F
stat to revert to the mode (heat or cool) in which
75
74 HEATING TEMPERATURES
73
it was last cycled before switching to the AUTO mode and will prevent automatic switching for
14
