a flashing BATTERY on the display, the installed battery may be dead. If you re- move the old battery and install a fresh battery within one minute, you may not lose your programming. After installing a new battery, follow the procedures in CHECK YOUR PROGRAMMING to determine whether your programming was main- tained. If the thermostat retains program-
ming, press | SYSTEM | until OFF is displayed, |
SWITCH |
put the thermostat back on the wall, press
SYSTEM | to select the operating mode you |
SWITCH |
want, then press RUN to start program
PRGM
operation. If the program is lost, you must reprogram the thermostat. See PRO-
GRAMMING YOUR THERMOSTAT.
38
