b.What temperature should the building be at this time? (heating? cooling?)
2a. What time does the building become va- cant?
b.What temperature should the building be at this time?
Now look at the factory preprogrammed times and temperatures shown below. If this program
will suit your needs, simply press PRGMRUN to begin running the factory preset program.
FACTORY PREPROGRAMMING
Heating Program for ALL days of the Week:
PERIOD | TIME | TEMP | FAN | DAMPER |
Occupied (O) | 8:00 AM | 70 | PRG | Open |
Unoccupied (U) | 5:00 PM | 64 | AUTO | Closed |
Cooling Program for ALL days of the Week:
PERIOD | TIME | TEMP | FAN | DAMPER |
Occupied (O) | 8:00 AM | 78 | PRG | Open |
Unoccupied (U) | 5:00 PM | 82 | AUTO | Closed |
If you want to change the preprogrammed times and temperatures, do the following.
Determine the heating and cooling times and temperatures you want to use. Use the follow- ing table to plan your program time periods and temperatures. You may also want to look at the sample program table to get an idea of how the thermostat can be programmed. You may se- lect up to two heating temperatures (HEAT O for occupied temperature and HEAT U for unoccupied temperature), and up to two cool- ing temperatures (COOL O and COOL U).
NOTE
To operate properly in the AUTO mode, there must be a minimum 1°F separation between the highest heat temperature and the lowest cool temperature.
19
