(TC/UB SET) menu

(TC PRESET/UB PRESET/TC LINK, etc.)

The default settings are marked with B. The indicators in parentheses appear when the items are selected.

See page 64 for details on selecting menu items.

Press the MENU button t select the (TC/UB SET) by turning the SEL/PUSH EXEC dial.

TC PRESETxPRESETYou can preset the time code.

1Select [TC PRESET] by turning the SEL/ PUSH EXEC dial, then press the dial.

2Select [PRESET] by turning the SEL/ PUSH EXEC dial, then press the dial.

3Select the first 2 digits by turning the SEL/ PUSH EXEC dial, then press the dial. You can set the time code between 00:00:00:00 and 23:59:59:29.

4Set other digits by repeating step 3.5 Select [OK] by turning the SEL/PUSH EXEC dial, then press the dial.xRESET

You can reset the time code (00:00:00:00). Select [RESET] in step 1 of the [PRESET].

UB PRESET

xPRESET

You can preset the user bit.

1Select [UB PRESET] by turning the SEL/ PUSH EXEC dial, then press the dial.

2Select [PRESET] by turning the SEL/ PUSH EXEC dial, then press the dial.

3Select the first 2 digits by turning the SEL/ PUSH EXEC dial, then press the dial.

4Set other digits by repeating step 3.

5 Select [OK] by turning the SEL/PUSH EXEC dial, then press the dial.

xRESET

You can reset the time code (00:00:00:00). Select [RESET] in step 1 of the [PRESET].

TC RUNYou can select how the time code advances.BREC RUN

Time code value advances only while recording. Select this when making the time code continuous at backspace editing.

FREE RUN

Time code value advances freely regardless of the camcorder’s current operation mode. Select this when adjusting the discrepancy between time code value and real time.

TC MAKEBREGENERATE

Select to make the time code continuous at backspace editing. Regardless of the [TC RUN] setting, the running mode is automatically set to [REC RUN].

PRESET

Select when you do not want to make the time code continuous at backspace editing.

TC LINKYou can synchronize the time codes of multiple HVR-V1E/V1Ps.This function is useful for editing movies recorded by multiple camcorders.

1Decide which camcorder will generate a time code (main camcorder) and which camcorder will receive that time code (sub camcorder). Make sure a tape is loaded in the main camcorder.

2Set the POWER switches of the main and sub camcorders to CAMERA.3Connect the main camcorder to the sub camcorder with an i.LINK cable.

Menu the Using

Continued , 85