1 Set “REC LEVEL” to “MANUAL” in the menu.

For details, see “Setting the Recording Level” (page 32).

2 Select a folder.

Press /MENU to display the folder selection window.

Press or to select the folder in which you want to record messages, then press .

3 Press and hold (record/pause).

The IC recorder enters the record standby mode. When you speak into the microphone, the level meter in the display window moves.

4 Press or to adjust the recording level, depending on the sound source.

Adjust the maximum level of the sound to be recorded to about –12 dB on the level meter, according the sound source.

If “” is displayed, press or

and adjust the recording level

down so that “” is not displayed, to prevent sound distortion.

OVER indicator

Adjust the maximum level of the sound to about –12 dB.

Press and hold or to change the sound level continuously. The sound level is also displayed as a number below the level meter.

5 Make other settings for recording such as “LIMITER,”“LCF (LOW CUT),” etc., in the menu.

6 Start recording.

Press (record/pause).

The operation indicator lights in red

and “” is displayed. 

You do not need to press and hold (record/pause) while recording.

Speak into the built-in microphone. 7 Press (stop) to stop recording.

34GB