When the battery indicator indicates “
,” charging is completed. (Charging time: approx. 4 hours*)
When you use the IC recorder for the first time, or after you have not used the IC recorder for a certain time, it is recommended that you charge the batteries repeatedly until “
” is displayed.
If the battery indicator is not displayed, charging has not been done properly. Proceed from step 1 again.
*This is an approximation for the time it takes to charge from no remaining battery power to full battery power at room temperature. It varies depending on the remaining power and the condition of the batteries. It also takes more time if the temperature of the batteries is low, or if the batteries are charged while you are transferring data to the IC recorder.
Follow the procedures below; otherwise, data may be damaged.
1 If you are recording or playing back a message, press (stop) to put the
IC recorder into the stop mode.
2 Make sure that the operation indicator is not flashing.
3 Disconnect the USB AC adaptor from the AC outlet, then disconnect the IC recorder from the USB AC adaptor.
Notes
While “
” or “
” is being displayed instead of the battery indicator, you cannot charge the batteries. Charge the batteries in an environment with a temperature of 5 °C - 35 °C (41 °F - 95 °F).
While playing back messages using the built- in speaker, you cannot charge the batteries.
Information Additional
125GB