Disconnecting the IC recorder from your computer

Follow the procedures below; otherwise, data may be damaged.

1 Make sure that the operation indicator is not flashing.

2 Disconnect the USB connecting cable connected to the IC recorder from the USB connector of the computer.

On the Windows screen, left-click “Safely Remove Hardware” on the taskbar, and click “Safely remove USB Mass Storage Device.”

On the Macintosh screen, drag the “IC RECORDER” on the desktop to “Trash” and drop it there.

For details on disconnecting the IC recorder, refer to the operating instructions supplied with your computer.

Tips

You can charge the rechargeable batteries by connecting the IC recorder to an AC outlet using a USB AC adaptor (not supplied) (page 124).

When replacing the batteries, messages recorded or alarm settings are not erased even when you remove the batteries.

When replacing the batteries, the clock continues moving for a certain period of time after you remove the batteries.

Notes

While “” or “” is flashing instead of the battery indicator, you cannot charge the batteries. Charge the batteries in an environment with a temperature of 5 °C

- 35 °C (41 °F - 95 °F).

If “USB CHARGE” in the “DETAIL MENU” menu is set to “OFF,” you cannot charge the batteries using your computer. Set “USB CHARGE” to “ON” (page 91).

During playback using the internal speaker, you cannot charge the batteries.

When you use the IC recorder with rechargeable batteries, the battery indicator may not light fully.

16GB