Notes

If you start recording with pre-recording function using the built-in microphones, a click noise may be recorded when you press (record/pause). To record with pre- recording function, we recommend using an external microphone.

When the remaining recordable time is less than 10 seconds, the pre-recording function is disabled.

When 60 minutes have passed after the IC recorder entered the standby mode, the standby mode will be cancelled and recording stops.

If you stop recording before step 8, sounds buffered in the memory will not be saved.

To cancel the pre-recording function

Set “PRE REC” to “OFF” in step 4.

Cutting out Low

Frequency – the LCF

Function

 



Recording

,

 

/MENU

When you set the LCF (Low Cut Filter) function to “ON” in the stop or recording mode, you cut out a frequency of lower than 200 Hz to reduce the roaring noise from wind, etc., this helps to record a sound source more clearly.

The LCF function is set to “OFF” when you purchase the IC recorder.

39GB