2 Press or to select “MIC IN,” then press .

3 Press (record/pause) to start recording.

The built-in microphones are automatically cut off.

If the input level is not strong enough, adjust the recording level on the IC recorder.

When a plug in power type microphone is connected, power is automatically supplied to the microphone from the IC recorder.

Note

If “SELECT INPUT” is not displayed, set it in the menu (page 88).

Recommended microphones

You can use the Sony ECM-CS10, or ECM-CZ10 electret condenser microphone (not supplied).

Recording sound from a telephone or a cell phone

You can use the ECM‑TL1 headphone- type electret condenser microphone (not supplied) to record sound from a telephone or a cell phone.

Insert the earphone of the microphone into your ear, then, while holding the receiver to the ear with the earphone in it, connect the plug of the earphone to thejack of the IC recorder.

Notes

After you have made the connection, check the sound quality of the conversation and the recording level before you start recording.

If the beep of the telephone or a dial tone is recorded, the conversation may be recorded with lower level of sound. In this case, start recording after the conversation has started.

The VOR function may not work, depending on the kind of telephone or the line condition.

We assume no responsibility whatsoever for any inconvenience, even if you cannot record a conversation using the IC recorder.

48GB