Sony J-10, J-10SDI, J-30 2-2Connector Panel

Parts of Function and Location 2 Chapter

2-2 Connector Panel

2-2-1 Connector Panel of the J-10/30

1 AC IN connector

					2 RS232C connector
				3 REMOTE IN (9P) connector
6 AUDIO MONITOR		5 VIDEO OUTPUT 4 EXT SYNC input connector
	OUTPUT connectors		connectors

1AC IN connector

Connects to an AC outlet using the power cord (not supplied).

2RS232C (RS-232C serial interface) connector (D-sub 9-pin)

Used to remote-control this unit from an external device provided with a Sony 9-pin remote control interface.

3REMOTE IN (9P) connector (RS-422A serial interface, 9-pin)

Used to remote-control this unit from an external device provided with a Sony 9-pin remote control interface.

4EXT SYNC (external synchronization) input connector

Inputs the reference video signal. However, on this unit, use this for frame synchronization only, not for color subcarrier synchronization.

5VIDEO OUTPUT connectors

COMPOSITE (analog composite video) (SUPER) output connector (phono jack): Outputs an analog composite video signal. When basic menu item

005, DISPLAY INFORMATION SELECT, of the setup menu is set as anything other than OFF, the output from this connector outputs superimposed character information such as time code, menu settings, or alarm messages.

COMPOSITE (analog composite video) (SUPER) output connector (BNC): Outputs an analog

composite video signal. When basic menu item 005, DISPLAY INFORMATION SELECT, of the setup menu is set as anything other than OFF, the output from this connector outputs superimposed character information such as time code, menu settings, or alarm messages.

S VIDEO output connector (Mini-DIN 4-pin):

Outputs an S VIDEO signal.

2-8 Chapter 2 Location and Function of Parts