Item number | Item name |
| Settings | |||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
501 | STILL TIMER |
| Sets the time interval from the tape stop mode to the tape protection mode. | |||||||||||||||||
|
|
| In order to protect the video heads and the tape, this unit enters the tape | |||||||||||||||||
|
|
| protection mode automatically after a certain amount of time has elapsed since | |||||||||||||||||
|
|
| the unit entered the tape stop mode (STOP mode or a still picture in jog/shuttle | |||||||||||||||||
|
|
| mode). | |||||||||||||||||
|
| 0.5S ... | 8M | ... 30M: Set the value in the range 0.5 seconds to 30 minutes. | ||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
651 | UMID OUTPUT |
| When using the Digital Betacam or MPEG IMX format, select whether or not to | |||||||||||||||||
|
| output the UMID data recorded on the tape from the SDI output connector and | ||||||||||||||||||
|
|
| the type of the UMID data if it is output. | |||||||||||||||||
|
| OFF |
| : Do not output the UMID data. | ||||||||||||||||
|
| BASIC: Output as the Basic UMID data (32 byte). | ||||||||||||||||||
|
| EXTENDED: Output as the Extended UMID data (64 byte). | ||||||||||||||||||
|
|
| Notes |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
| • Even if EXTENDED is selected, Basic UMID is output if Basic UMID is recorded | |||||||||||||||||
|
|
| on the tape being played back. | |||||||||||||||||
|
|
| • When menu item 901, VIDEO OUTPUT DATA is set to 8bit, nothing of UMID is | |||||||||||||||||
|
|
| output. | |||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
| |||||||||
657 | ESSENCE MARK TAPE |
| When using the Digital Betacam or MPEG IMX format, select whether or not to | |||||||||||||||||
| OUTPUT |
| output essence marks recorded on the tape from the SDI output connector. | |||||||||||||||||
| ON: Output essence marks recorded on the tape. | |||||||||||||||||||
|
| OFF |
| : Do not output essence marks recorded on the tape. | ||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Note |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
| When menu item 901, VIDEO OUTPUT DATA is set to 8bit, nothing of essence | |||||||||||||||||
|
|
| marks is output. | |||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
| |||||||||
658 | SHOT MARK ESSENCE |
| When using the Digital Betacam, MPEG IMX or Betacam SX format, select | |||||||||||||||||
| MARK CONVERT |
| whether or not to convert shot marks recorded in the LTC track into essence | |||||||||||||||||
|
| marks and output them from the SDI output connector. | ||||||||||||||||||
|
| ON: Convert shot marks into essence marks and output. | ||||||||||||||||||
|
| OFF |
| : Do not convert shot marks into essence marks. | ||||||||||||||||
|
|
| Depending on the type of the detected shot marks, the output essence marks are | |||||||||||||||||
|
|
| “_RecStart”, “_ShotMark1”, or “_ShotMark2”. | |||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
| Notes |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
| • Of the shot marks, post marks are not converted to essence marks. | |||||||||||||||||
|
|
| • Shot mark detection timing depends on playback conditions. | |||||||||||||||||
|
|
| • When menu item 901, VIDEO OUTPUT DATA is set to 8bit, nothing of essence | |||||||||||||||||
|
|
| marks is output. | |||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
| |||||||||
660 | ESSENCE MARK VANC |
| When menu item 658 is set to ON, specify the line into which to insert shot marks | |||||||||||||||||
| LINE |
| converted into essence marks. | |||||||||||||||||
| 12H, 13H, 15H, 16H, |
| , 18H, 19H | |||||||||||||||||
| 17H | |||||||||||||||||||
|
| 09H, 10H, 12H, 13H, 14H, 15H, 16H, |
| , 18H | ||||||||||||||||
|
| 17H | ||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
710 | INTERNAL VIDEO | Select the test signal to be output from the VTR’s internal test signal generator. | ||||||||||||||||||
| SIGNAL GENERATOR | OFF | : No test signal is generated. (The VTR operates normally.) | |||||||||||||||||
|
| CB75: | 75% color bar signal | |||||||||||||||||
|
|
|
|
|
|
|
|
|
|
| ||||||||||
713a) | VIDEO SETUP | Set the setup amount to be added to the composite output signal. | ||||||||||||||||||
| REFERENCE LEVEL | Default value: | 0.0% |
|
|
|
|
| ||||||||||||
| (When operating in 525 | 7.5% |
|
|
|
|
| |||||||||||||
| mode) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||
715a) | VIDEO GAIN CONTROL |
| Adjust the video output level. Only Y signal adjustment is permitted. | |||||||||||||||||
|
| Default value: | 20H |
|
|
|
|
|
| |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
716a) | CHROMA GAIN |
| Adjust the chroma output level. | |||||||||||||||||
| CONTROL |
| Default value: |
|
|
|
|
|
|
|
|
|
| |||||||
|
|
| 20H |
| ||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
717a) | CHROMA PHASE | Adjust the chroma phase. Only composite output signal adjustment is permitted. | ||||||||||||||||||
| CONTROL | Default value: |
| 80H |
|
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
718a) | SETUP LEVEL (525 mode)/ | Adjust the setup level (black level). | ||||||||||||||||||
| BLACK LEVEL (625 mode) | Default value: 0H | ||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
a) Menu items 713 and 715 to 718 can be used only for
video processing of the analog video signal. They
cannnot be used for video processing of the digital video |
|
signal (SDI/DV output). | |
Chapter 7 Setup Menu |
Menu Setup 7 Chapter