Menu Setup 7 Chapter

7-2 Menu Operations

Switching between 525/625 line systems (basic menu item 013)

Using the following procedure, you can set basic menu item 013, 525/625 SYSTEM SELECT, to ON, and then switch between 525 (NTSC) and 625 (PAL).

(The following is the procedure example of switching from a 525 (NTSC) system to a 625 (PAL) system.)

1 Select basic menu item 013 and display it.

The time data display area and the monitor screen connected the COMPOSITE (SUPER) output connector, SDI (SUPER) output connector (for J-10SDI/30SDI only) or DV connector show the following displays.

Time data display area

Monitor screen

ITEM-013

525/625 SYSTEM

SELECT

OFF

2 Holding down the JOG/SHUTTLE button, turn the JOG/SHUTTLE dial to change the setting from OFF to ON.

The displays change as follows.

Time data display area

Monitor screen

ITEM-013

525/625 SYSTEM

SELECT

ON

Push SET button!!

3 Press the SET/MENU button.

The displays change as follows.

Time data display area

Monitor screen

525/625 SYSTEM SELECT

525

If the 525/625 setting is changed, turn power off and on!

7-4Chapter 7 Setup Menu