Sony J-10, J-10SDI, J-30 manual 48

Menu Setup 7 Chapter

7-4 Extended Menu

Item number	Item name	Settings
719	SYSTEM PHASE SYNC	Adjust the SYNC phase of the output signal.
		Default value:					3FH
721	Y/C DELAY	Adjust the Y/C delay for playback from an analog Betacam cassette.
		Default value:					800H
802	DIGITAL AUDIO MUTING	Set the digital audio muting conditions during shuttle playback.
	IN SHUTTLE MODE	OFF	: Not muted.
		CUEUP: Muted during cue-up or preroll operations.
		FULL: Muted in shuttle mode.
		SLOW: Muted in ±0.2 times or slower.
808	INTERNAL AUDIO	Select the operation of the internal audio test signal generator.
	SIGNAL GENERATOR	OFF	: No operation.
		1KHZ: At 1 kHz, –20 dB FS sine wave is output on all audio output channels.
831a)	i.LINK AUDIO OUTPUT	Selects audio channels output from the DV connector.
	SELECT	CH1/2			: Outputs audio signals (16 bits/48K) recorded in CH-1/2.
		CH3/4: Outputs audio signals (16 bits/48K) recorded in CH-3/4.
		CH1/2/3/4: Outputs audio signals (12 bits/32K) recorded in CH-1/2/3/4.
		CH5/6: Outputs audio signals (16 bits/48K) in CH-5/6 (J-30/30SDI).
		CH7/8: Outputs audio signals (16 bits/48K) in CH-7/8 (J-30/30SDI).
		CH5/6/7/8: Outputs audio signals (12 bits/32K) in CH-5/6/7/8 (J-30/30SDI).
901b)	VIDEO OUTPUT DATA	Set the bit length of the signal output from the SDI output connector.
	(J-10SDI/30SDI only)			: When connecting to a 10-bit system
		10bit
		8bit: When connecting to a 8-bit system
922	IMX NOISELESS PB	Select the noiseless playback picture output when using the MPEG IMX format.
	SELECT	FRAME				: Frame picture
	(J-30/30SDI only)	FIELD1:				Field 1 picture
		FIELD2: Field 2 picture

a)Audio signals are muted if you select the channel unavailable for the format you are using.

b)Select the bit length used in the system to which this unit is connected.

7-12Chapter 7 Setup Menu