Playback 4 Chapter

4-3 Using the Remote Commander

2 Turn the JOG/SHUTTLE dial to change the setting from “OFF” to “ON” while holding down the JOG/ SHUTTLE button, and then release the JOG/ SHUTTLE button.

Time data display area

Monitor screen

REMOTE INTERFACE

137

❉213:WIRELESS-on 501

Items without ❉ are omitted.

(ON flashes while the JOG/SHUTTLE button is being pressed.)

3 Press the SET/MENU button.

Time data display area and monitor go back to the original views.

4-3-3 Operating the Remote

Commander

Press the function keys while pointing the infrared transmitter of the Remote Commander at the remote control detector.

Each key functions same as the corresponding key on the control panel attached to the unit.

Note

For the SEARCH key, is 10 times forward speed, is 10 times reverse speed.

This unit

Remote control detector

Infrared transmitter

Remote

Commander

Note

When two or more units of J-10/10SDI/30/30SDI or J-H1/H3 (J-H series of compact players) are placed close to each other, the Remote Commander may affect more than one unit. In this case, select OFF in WIRELESS REMOTE CONTROL, extended menu item 213, of the other units you do not want to operate.

4-8Chapter 4 Playback