Setup

Detaching the speakers (KDE55XBR950 and KDE61XBR950 only)

The speakers on the KDE55XBR950 and KDE61XBR950 can be detached if required. If you use a multi-channel surround speaker system and there is insufficient space to install the display unit, we recommend using the speakers detached.

Be sure to remove the speakers before installing the TV on a wall, etc. Detaching the speakers from the TV should be performed by qualified Sony personnel.

When detaching the speakers, spread padding or the packaging material on the floor to prevent damage to the speaker housing or terminals. Be careful not to place too much pressure or use excessive force when detaching the speakers. Be sure the display unit is stable on the floor.

Speaker (left)

Rear side of the display unit

Packing material, etc.

Padding, etc.

Speaker (right)

To prevent the surface of the display unit from scratches and soils while detaching the speakers, protect it with a soft cloth or a blanket.

1Place a protective sheet or cloth beneath the TV on the floor. Turn the TV over so that you can see its rear panel.

2Remove the four screws marked with arrows located at the rear of each speaker (as shown below), and pull out the speakers straight to detach them from the display unit.

Rear of the display unit

Speaker

M4x10 screws (supplied) M4x14 screws (supplied) (For KDE55XBR950 only)

Keep the screws for future use. Use them to reattach the speakers.

26