Setup

Device with i.LINK

Using i.LINK Cables

 

This TV has three S400 i.LINK terminals (one in the front panel, and two in

 

the back panel). You can use the following i.LINK cables with this TV:

Sony ModelLength

VMC-IL4415

1.5 meters

VMC-IL4435

3.5 meters

4-pin i.LINK cable

Do not use cables other than the i.LINK cables listed above.

Connecting i.LINK Devices

Before connecting this unit to i.LINK-compatible equipment, read the instruction manual of the i.LINK device to be connected.

To connect a digital i.LINK device (using only a digital signal)

1Using an i.LINK cable (see page 50), connect the device’s i.LINK jack to either of the TV’s i.LINK jacks.

To connect an i.LINK device that supports an EIA-775A connection

1Using an i.LINK cable (see page 50), connect the device’s i.LINK jack to either of the TV’s i.LINK jacks.

2Using an A/V cable, connect the i.LINK device’s A/V output jacks to the TV’s A/V input jacks (VIDEO 3).

Only one i.LINK cable should connect the TV and any given i.LINK device.

50