i.LINK Setup

You can use the i.LINK Control Panel to access digital setup options, some of which are also available through the Digital Program Guide (described on page 73).

LINK.i

to move to selectEXIT to quit

To Do This ...

Do This ...

 

Set up the selected device

Press V v B b to highlight Setup and press

.

 

 

Set up Caption Vision

Once i.LINK Setup has been selected, Press b then V or v to Caption Vision, and

 

press

.

 

For details about setting up Caption Vision, see “Using the

Caption Vision Menu” on page 75.

Set up i.LINK Analog Video (Set-Top Box)

The TV is able to accept an analog signal from a selected set-top box. The set-top box must be EIA-775A compliant and must be connected to the TV’s VIDEO 3 input. To associate the device with the TV's analog VIDEO 3 input, press V or v to

select to Analog Video and press . All EIA-775A-compliant devices will be

shown in the list. Select the desired device from the list and press .

Notes on i.LINK

sThe TV can act as an i.LINK repeater, so that i.LINK signals are relayed to another device even when the TV is powered off. To enable this feature, set the i.LINK Standby option to On using the Setup menu as described on page 115.

sParental Control settings apply to the signal from a selected device. For more details, see page 109.

97