Programme Labels (Analogue mode only)

Assigns a channel name of your choice up to five letters or numbers. The name will be displayed briefly on the screen when the channel is selected. (Names for channels are usually taken automatically from Analogue Text (if available).)

1 Press OK to select “Programme Labels”.

2 Press M/m to select the channel you want to name, then press OK.

3 Press M/m/</, to select the desired letter or number (“s” for a blank space), then press OK.

If you input a wrong character

Press M/m/</, to select %/5 and press OK repeatedly until the wrong character is selected. Then, press M/m/</, to select the correct character and press OK.

4 Repeat the procedure in step 3 until the name is complete. 5 Press M/m/</, to select “End,” then press OK.

AV Preset

Do the following options.

1 Press OK to select “AV Preset”.

2 Press M/m to select the desired input source, then press OK.

3 Press OK. Then press M/m to select the desired option below, then press OK.

Option

Description

 

 

Label

Assigns a name to any equipment connected to the side and rear

 

sockets. The name will be displayed briefly on the screen when the

 

equipment is selected.

 

Press M/m to select one of the following, then press OK.

 

AV1 (or AV2/AV3/AV4/PC/HDMI) VIDEO/DVD/CABLE/

 

GAME/CAM/SAT: Uses one of these preset labels.

 

Edit: Creates your own label. Follow steps 3 through 5 of

 

Programme Labels (page 30).

 

Skip:

 

Skips an input source that is not connected to any equipment when

 

you press M/m to select the input source.

 

After selecting this option, press OK.

 

Sound Offset:

 

Sets an independent volume level to each equipment connected to

 

the TV.

 

Press , to select “Sound Offset”, then press OK. Press M/m to

 

select the desired volume level.

 

 

Manual Programme Preset (Analogue mode only)

Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“ATT”, press PROG +/- to select the programme number with the channel. You cannot select a programme number that is set to skip (page 32).

1

2

Press OK to select “Manual Programme Preset”.

Press M/m to select one of the following options, then press OK.

30