Problem | Cause/Remedy |
|
|
|
| |||
|
|
|
|
|
| |||
No colour on programmes | • Select “Reset” in the “Picture Adjustment” menu to return to the factory | |||||||
|
|
|
| settings (page 22). |
|
|
|
|
|
|
|
|
|
|
|
| |
No colour or irregular colour | • | Check the connection of the Y, PB/CB, PR/CR jacks of |
| 3. | ||||
| ||||||||
when viewing a signal from the | • | Make sure that the Y, PB/CB, PR/CR jacks of |
| 3 are firmly seated in their | ||||
| ||||||||
Y, PB/CB, PR/CR jacks of |
| respective sockets. |
|
|
|
| ||
|
| 3 |
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
Sound
Problem | Cause/Remedy | |
|
| |
No sound, but good picture | • Press 2 +/– or % (Mute). | |
| • | Check that “TV Speakers” is set to “on” in the “Features” menu (page 26). |
|
|
|
Noisy sound | • | See the “Picture noise” causes/remedies on page 44. |
|
|
|
Channels
Problem | Cause/Remedy |
|
|
The desired channel cannot be | • Switch between digital and analogue mode and select the desired digital/ |
selected | analogue channel. |
|
|
Some channels are blank | • Scrambled/Subscription only channel. Subscribe to the Pay Per View |
| service. |
| • Channel is used only for data (no picture or sound). |
| • Contact the broadcaster for transmission details. |
|
|
Digital channel is not displayed | • Check that the aerial is plugged directly into the TV (not through other |
| equipment). |
| • Contact a local installer to find out if digital transmissions are provided in |
| your area. |
| • Upgrade to a higher gain aerial. |
|
|
General
Problem | Cause/Remedy | ||||
|
|
|
|
|
|
The TV turns off automatically | • Check if the “Timer” is activated (page 28). | ||||
(the TV enters standby mode) | • If no signal is received or no operation is performed in the TV mode for 10 | ||||
|
|
|
|
| minutes, the TV automatically switches to standby mode. |
|
| ||||
The TV turns on automatically | • Check if the “Timer” is activated (page 28) | ||||
|
|
|
|
|
|
Some input sources cannot be | • Select “AV Preset” in the “Set Up” menu and cancel “Skip” of the input | ||||
selected | source (page 30). | ||||
|
|
|
|
|
|
The remote does not function | • Replace the batteries. | ||||
|
|
|
|
|
|
The lamp indicator |
|
|
| on front | • Turn the TV off. Turn the TV on again, if the lamp indicator is still lit then |
|
| ||||
of the TV set is lit. | replace the internal lamp. For details refer to page 39 to 41. | ||||
|
|
|
|
|
|
Continued
Information Additional
45