Option | Description | |
|
| |
Skip | Skips unused analogue channels when you press PROG +/- to | |
| select channels. (You can still select a skipped channel using the | |
| number buttons.) | |
| 1 | Press M/m to select “Yes”, then press OK. |
| 2 | Press OK to select “Confirm”, then press OK. |
| To restore a skipped channel, select “No” in step 1. | |
|
| |
ATT | Attenuates the RF signal. In case of a strong RF signal, some video | |
| interference may be displayed. | |
| 1 | Press m/M to select “On”, then press OK. |
| 2 | Press OK to select “Confirm”, then press OK. |
Tip
This option cannot be used if “AV2 Output” is set to
Digital Set Up
Displays the “Digital Set Up” menu. You can change/set the digital settings using this menu.
1 Press OK to select “Digital Set Up”.
2 Press m/M to select the desired icon below, then press OK.
Digital Tuning
Digital Auto Tuning
Programme List Edit
Digital Manual Tuning
Back:
Select:
Enter: OK
Digital Tuning menu
3 Press m/M to select one of the following options, then press OK.
Option | Description | ||
|
|
| |
Digital Tuning | Tunes in all the available digital channels. | ||
|
| Usually you do not need to do this operation because the channels | |
Digital Auto | |||
are already tuned when the TV was first installed (page 13). | |||
Tuning | |||
However, this option allows you to repeat the process (e.g., to | |||
|
| ||
|
| retune the TV after moving house, or to search for new channels | |
|
| that have been launched by broadcasters). | |
|
| 1 Press OK to start digital | |
|
| When all available digital channels have been tuned, a message | |
|
| stating that the | |
|
| 2 Press < . | |
|
|
| |
32