Features menu
Features
AV2 Output | TV |
TV Speakers | On |
PC Adjustment |
|
|
|
Select: | Set: OK Back: | End: MENU |
You can select the options listed below on the Features menu. To select options, see “Navigating through menus” (page 19).
AV2 Output
Sets a signal to be output through the socket labelled 
/
2 on the rear of the TV. If
you connect a VCR to the 
/
2 socket, you can then record from the equipment connected to other sockets of the TV.
1
2
Press OK to select “AV2 Output”.
Press m/M to select one of the following, then press OK.
•
•
•AV1: Outputs signals from equipment connected to the 
/
1 socket.
•AV4: Outputs signals from equipment connected to the 
4/
4 socket.
•Auto: Outputs whatever is being viewed on the screen.
TV Speakers
Turns off the TV speakers e.g. to listen to the sound through external audio equipment connected to the TV.
1
2
Press OK to select “TV Speakers”.
Press m/M to select one of the following, then press OK.
•On: the sound is output from the TV speakers.
•One Time Off: the TV speakers are temporarily turned off allowing you to listen to the sound from external audio equipment.
Tip
The “TV speakers” option automatically returns to “On” when the TV set is switched off.
•Permanent Off: the TV speakers are permanently turned off allowing you to listen to the sound from external audio equipment.
Tip
To turn on the TV speakers again, change to on.
26