Viewing pictures from connected equipment
Switch on the connected equipment, then perform one of the following operation.
For equipment connected to the scart sockets using a
Start playback on the connected equipment.
The picture from the connected equipment appears on the screen.
For an
Press PROG 
/
repeatedly until the correct input symbol (see below) appears on the screen.
For other connected equipment
Press 
/
repeatedly until the correct input symbol (see below) appears on the screen or press OK to access the Input signal index table. Press , to select an input source, press m/M, then press OK.
1/ | 1, | 2/ | 2: |
Audio/video or RGB input signal through the scart | |||
socket | / | 1 or 2. | appears only if an RGB |
source has been connected.
3:
Component input signal through the Y, PB/CB, PR/CR
sockets 
/
3, and audio input signal through the
L/G/S/I, R/D/D/D sockets 
/
3.
4/
4:
Video input signal through the video socket 
4, and audio input signal through the audio socket L/G/S/I
(MONO), R/D/D/D sockets 
4. 
appears only if
the equipment is connected to the S video socket 
4
instead of the video socket 
4, and S video input
signal is input through the S video socket 
4.
5:
RGB input signal through the PC connectors 
5, and audio input signal through the socket
5.
6:
Digital audio/video signal is input through the HDMI IN 6 socket. Audio input signal is analogue only if the equipment has been connected using the DVI and audio out socket.
Additional operations
To | Do this |
|
|
| |
Return to the normal Press DIGITAL or | . | |
TV operation |
|
|
|
| |
Access the Input | Press OK. Press , to select an | |
signal index table | input source, press m/M, then press | |
| OK. |
|
|
|
|
Using the Menu
Navigating through menus
Menu the Using
2,3,4
4
1
1 Press MENU to display the menu.
2 Press M/m to select a menu icon, press ,. 3 Press M/m/</, to select an option.
4 Press M/m/</, to change/set the setting, then press OK.
To exit the menu, press MENU.
To return to the last display, press <.
Continued
19