Picture Adjustment
Picture Mode | Custom |
| |
Contrast |
| Max |
|
Brightness | 50 |
| |
Colour |
| 50 |
|
Hue |
| 0 |
|
Sharpness | 15 |
| |
Colour | Tone | Warm |
|
Reset |
|
|
|
Noise Reduction | Auto |
| |
Iris |
| High |
|
Select: | Set: OK | Back: | End: MENU |
You can select the options listed below on the Picture Adjustment menu. To select options, see “Navigating through menus” (page 19).
Tip
When you set the “Picture Mode” option to “Vivid” or “Standard,” you can adjust only “Contrast,” and “Reset.”
Picture Mode
Selects the picture mode.
1 Press OK to select “Picture Mode”.
2 Press m/M to select one of the following picture modes, then press OK.
•Vivid: For big lighted spaces.
•Standard: Optimal picture for home use.
•Custom: Allows you to store your own prefered settings.
Tip
You can change the picture mode by pressing 
repeatedly.
Contrast/Brightness/Colour/Hue/Sharpness
1 Press OK to select the option.
2 Press </, to set the level, then press OK.
Tip
“Hue” can only be adjusted for an NTSC colour signal (e.g., U.S.A. video tapes).
“Brightness”, “Colour”, “Hue” and “Sharpness” only appear and can be adjusted if “Picture Mode” is set to “Custom”.
Colour Tone
1 Press OK to select “Colour Tone”.
2 Press m/M to select one of the following, then press OK.
•Cool: Gives the white colours a blue tint.
•Neutral: Gives the white colours a neutral tint.
•Warm: Gives the white colours a red tint.
Tip
“Warm” only appears and can be adjusted if “Picture Mode” is set to “Custom”.
Continued
Menu the Using
21