1 Connect your aerial to the socket on the rear of the TV.

If connecting to an aerial only (A)

Connect the socket to the socket on the rear of the TV with the supplied coaxial cable.

Go to step 3.

If connecting to a VCR with an aerial (B)

Go to step 2.

2 Connect your VCR.

1Connect the socket on the rear of the TV to the input socket on your VCR with the RF lead.

2Connect the output socket on your VCR to the

socket on the rear of the TV with the supplied coaxial cable.

3Connect the scart socket on your VCR to the

/ 2 scart socket on the rear of the TV with a scart lead.

Note

Do not connect the mains lead to your mains socket until all connections are complete.

3 Bundle the cable.

4:Preventing the TV from toppling over

Sony strongly recommends using the TV stand SU- RG11S (for KDF-E42A12U)/SU-RG11M (for KDF- E50A12U) with a support belt designed for your TV.

5:Switching on the TV

1

2

1Connect the TV to your mains socket (220- 240V AC, 50Hz).

2Press 1 on the TV (front side).

When you switch on the TV for the first time, the message confirming the TV start auto-tuning appears on the screen.

When the TV is in standby mode (the 1 (standby) indicator on the front of the TV is red), press TV +/1 on the remote to switch on the TV, then go to page 13.

12