To | Do this |
Set a programme to be displayed automatically on the screen when it starts
– Reminder
1Press m/M/</, to select the future programme you want to display.
2Press OK.
3Press m/M to select “Reminder”.
4Press OK to automatically display the selected programme when the programme starts.
A c symbol appears by that programme’s information.
Note
If you switch the TV to standby mode, it will automatically turn itself on when the programme is about to start.
Set the time and date of a programme you | 1 | Press OK. | |
want to record – Manual Timer REC | 2 | Press m/M to select “Manual Timer REC”. | |
| 3 | Press m/M to select the date, then press ,. | |
| 4 | Set the start and stop time in the same way as in step 3. | |
| 5 | Press m/M to select the channel, then press OK to set the TV | |
|
| and your VCR timers. | |
|
| A | symbol appears by that programme’s information. |
Notes
•You can set VCR timer recording on the TV only for Smartlink compatible VCRs. If your VCR is not Smartlink compatible, a message will be displayed to remind you to set your VCR timer.
•Once a recording has begun, you can switch the TV to standby mode, but do not switch off the TV completely or the recording may be cancelled.
Cancel a recording/reminder – Timer list 1 | Press OK. |
2 | Press m/M to select “Timer list”. |
3 | Press m/M to select the programme you want to cancel, then |
| press OK. |
| A display appears to confirm that you want to cancel the programme. |
4 | Press < to select “Yes”, then press OK to confirm. |
|
|
TV Watching
17