Bundling Cords and Cables
You can organize the cables in the back of the TV.
1 Bundle the cables into the opening of the cable cover, and attach the cover.
2 Put the cables from both sides together and secure them with the clip at the bottom.
Clip
Notes
•It may not be possible to fasten with clips if the cables are too thick.
•If all the cables cannot be secured with the clip, you may leave some of them hanging down on either side of the TV.
Adjusting the Viewing Angle of the
TV
You can adjust the angle to avoid the reflection of light and get a better view of the TV.
Note
•When adjusting the angle, steady the base of the stand with your hand. Be careful not to get your fingers caught between the TV and the stand.
•When you adjust the angle, make sure that the cables are not caught between the TV and the stand. If some of the cables get caught, divide them into two groups at the clip and pull them away from each other to free them up.
the Installing TV
Carrying the TV
When carrying the TV, hold it as illustrated below.
23