Setting the Video Inputs
You can enjoy images (and sound) from optional video equipment connected to this unit by selecting the appropriate input. For details on connection, see pages 24 through 35(Continued).
DVD/ SAT/ POWER
MUTING VCR CABLE
MODE
PICTURE WIDE SLEEP DISPLAY
TOP MENU FAVORITES MENU
TV
F1
F2
TV VIDEO 1/2 VIDEO 3 VIDEO 4 | 1 |
|
CH +/–
RESET FREEZE MTS/SAP
GUIDE TV/SAT
1 For video input 1 and 2
Press VIDEO 1/2 repeatedly until the desired video input appears.
Each time you press VIDEO 1/2, the input changes as follows.
Select | Display indication |
• VIDEO 1 IN | Video 1 |
| R r |
• VIDEO 2 IN | Video 2 |
|
|
For video input 3 (HD/DVD 3 IN)
Press VIDEO 3.
“Video 3”* indication appears.
For video input 4 (HDMI 4 IN)
Press VIDEO 4.
“Video 4”* indication appears.
*The type of picture signal (480i, 480p, 720p, or 1080i) appears under “Video 3” and “Video 4.”
Tips
• When “Skip” is selected as a label using “Video Label” in
the (Setup) menu, the selected input will be skipped in the cycle (see page 51).
•You can also select the inputs by using the TV/VIDEO button on the TV.
TV t VIDEO 1 IN t VIDEO 2 IN
R
HDMI 4 IN T HD/DVD 3 IN T
•When you have preset a label for each video input using
“Video Label” in the 
(Setup) menu, the label will be displayed (see page 51).
2 Operate the selected optional equipment.
For details, see “Using your Remote Controls with Other Equipment” on page 18, or refer to the instructions supplied with each equipment.
To return to watching the TV
Press TV, any of 0 - 9 and ENT (enter) or CH
oror
50