Connecting a DVD Player with Component Video Connectors

Rear of TV

OUT(VAR/FIX)

AUDIO L

AUDIO

R

Y )

PB

720p / 480p / 480i

PR

(1080i /

HD/DVD IN

AUDIO L

 

R

3

 

Use this hookup if:

• Your DVD player has component (Y, PB, PR) jacks.

Tips

•The Y, PB and PR jacks on your DVD player are sometimes labeled as Y, CB and CR, or Y, B-Y and R-Y. If so, connect the cables to the matching colors.

•To take advantage of the Wide Screen Modes, set the aspect ratio of the output signal to 16:9 on your DVD player. For details, refer to the operating instructions supplied with your DVD player.

Disconnect all power sources before making any connections.

1 Using a component video cable, connect the DVD player’s Y, PB and PR jacks to the Y, PB and PR jacks on the TV.

Use the HD/DVD 3 IN connections.

2 Using an AUDIO cable, connect the DVD player’s AUDIO OUT jacks to the TV’s AUDIO IN jacks.

Note

The Y, PB and PR jacks do not provide audio, so audio cables must be connected to provide sound.

Tip

Use VIDEO 3 on the remote control to select HD/DVD 3 IN to watch the DVD player input.

Y

PB

 

Component video cable (not supplied)

PR

AUDIO cable (not supplied)

 

AUDIO-L (white)

AUDIO-R (red)

DVD Player

30