Connecting an Amplifier That

Supports Dolby Pro Logic

Decoder

If you use an amplifier with a Dolby Pro Logic decoder instead of the projection TV’s audio system, you can still use the projection TV’s speaker as a center speaker.

1Using the speaker cords (supplied with the amplifier), connect the speaker terminals on the amplifier to CENTER SPEAKER IN +/– on the projection TV.

2Using an AUDIO cable, connect AUDIO (FIX) OUT on the projection TV to one of the unused Line inputs (e.g. Tape-2, AUX1, etc.) on the amplifier (White-AUDIO Left, red-AUDIO Right).

3Set the amplifier to the chosen Line input and use the AUDIO menu to set “SPEAKER” to “CENTER IN” on the projection TV. (see “SPEAKER” on page 38)

22

Disconnect all power sources before making any connections.

(Rear of projection TV)

L

L

R

R

 

CENTER IN #

AUDIO OUT

CENTER IN 3

FIX VAR

 

L

1

R

AUDIO (FIX) OUT-L AUDIO (FIX) OUT-R

2

RK-74A (not supplied)

 

Line input

3

Amplifier with Dolby

Pro Logic decoder

 

 

 

 

 

 

 

 

 

 

 

 

 

Rear

 

 

 

 

 

 

 

 

 

Rear

speaker (L)

 

 

 

 

 

 

 

speaker (R)

 

 

 

 

 

 

 

 

 

 

 

 

Front

 

 

 

Front

 

speaker (L)

 

speaker (R)