If your projection TV is not connected to a cable system

If you perform AUTO SET UP, CABLE is set to ON automatically. After finishing AUTO SET UP, set CABLE to OFF in the CHANNEL SET UP menu, then set AUTO PROGRAM to YES to perform automatic channel presetting. (see

Tip z

It is recommended to perform FLASH FOCUS about 30 minutes after the projection TV is first turned on.

POWER

The cross pattern appears and FLASH FOCUS begins to work. The adjustment is completed when the cross pattern becomes white.

TIMER/

FLASH FOCUS

“CABLE” and “AUTO PROGRAM” on page 42)

To perform AUTO SET UP again

•Press SET UP inside the drop-down panel on the projection TV, and perform steps 3-5 on page 24.

•Press CHANNEL + or CHANNEL – to select a language.

•Press VOLUME – to restore factory settings (“CONTINUE TO AUTO PROGRAM?” will appear on the screen. Press CHANNEL + to execute or CHANNEL – to exit).

•Press SET UP to exit.

Adjusting the

Convergence

Automatically (FLASH

FOCUS)

The projection tube image appears on the screen in three layers (red, green and blue). If they do not converge, the color is poor and the picture blurs.

Before you use your projection TV, be sure to adjust the convergence.

The FLASH FOCUS feature allows you to adjust the convergence automatically.

STAND BY

STEREO

SET UP

FLASH FOCUS

 

VOLUME CHANNEL

+

+

TV/VIDEO –

–

WIDE

MODE

1 2 3

4 5 6

1Receive a TV or cable TV program.

2Press FLASH FOCUS for every wide screen mode; NORMAL, WIDE ZOOM, ZOOM and FULL.

FLASH FOCUS

To select the wide screen mode, press WIDE MODE on the remote control.

Up Set Basic

Toobtainanoptimumconvergence for Digital TV programs

The optimum convergence alignment varies with digital TV formats. Whenever you find that the picture blurs, press FLASH FOCUS.

Notes:

•You cannot perform any other functions until FLASH FOCUS has completed its cycle.

•If you perform any other operation while FLASH FOCUS is in progress, FLASH FOCUS operation is canceled.

25