SPEAKER

—Custom selection of audio output source

ALL ON:

Select to listen to the sound from the projection TV speakers alone.

L/R OFF:

Select to turn off the projection TV left and right speakers and listen to the left and right channel sounds through a separate audio system’s speakers.

ALL OFF:

Select to turn off the projection TV speakers and listen to the projection TV’s sound only through an external audio system’s speakers.

CENTER IN:

Select to use the projection TV center speaker as center speaker when you connect an amplifier with a Dolby Pro Logic decoder. (see “Connecting an Amplifier That Supports Dolby Pro Logic Decoder” on page 22)

EFFECT

—Customizes surround sound effects based on the program’s audio type

EFFECT can only be set when SPEAKER is set to ALL ON or L/R OFF.

;PRO LOGIC:

Produces superb theater-like surround effects. Most effective for programs encoded in Dolby surround.

;3 STEREO:

Produces a dynamic three dimensional sound without using the rear speakers. The sound of the rear channel is output from the front speakers.

SRS 3D MONO:

Adds a surround-like effect to mono programs.

LIVE:

Produces surround effects with the atmosphere of a concert hall.

GAME:

Produces maximum audio impact. Most effective for video games.

OFF:

Normal stereo or mono reception.

SURROUND LEVEL

—Speaker volume adjustment for surround modes

After selecting one of the surround modes, adjust the volume of each speaker so that the sound will be even and natural. (see “Adjusting the Speaker Volume for Customized Surround Mode” on the right column)

To restore the factory settings

Press RESET on the remote control while the AUDIO menu is selected.

However, EFFECT is not reset to the factory setting even if you press RESET.

Adjusting the Speaker Volume for Customized Surround Mode

After you set EFFECT to one of the modes, adjust the volume of the front, center and rear speakers to the same level so that the projection TV’s sound will be even and natural. For ;PRO LOGIC and ;3 STEREO, adjust the speaker volume using the test tone feature.

Adjusting the speaker volume

1Connect the rear speakers (not supplied). For details, see “Mounting the Rear Speakers (not supplied)” on pages 6 and 7.

2Select SURROUND LEVEL from the AUDIO menu. (see “SURROUND LEVEL” on the left column)

;PRO-LOGIC

 

CENTER

 

REAR

 

BALANCE

 

TEST TONE :

OFF

Move Select Exit MENU

38