Watching Two Programs at One Time

—P&P (Twin View™)

The Picture-and-Picture (P&P) feature allows you to view two channels simultaneously, both in a reduced size screen. The main picture will appear on the right.

You can change the size of both pictures to suit your personal preference.

Note:

•The P&P feature is not available for the inputs from VIDEO 5 (DTV) IN.

Using the yellow labeled buttons for P&P operations

REFER TO THE ILLUSTRATION OF THE

REMOTE CONTROL ON THE INSIDE FRONT COVER OF THIS MANUAL AS YOU REVIEW THE FOLLOWING DESCRIPTIONS

Tip z

If you press RESET in P&P mode, the right and left pictures will be reset to the same size (factory-preset size.)

Press to display right (main) and left pictures.

Press (OFF) to close the sub picture.

Moving the joystick right or left will activate the same function.

LEFT

RIGHT

TV channel or input- source mode for the sub picture (It will dim in about 3 seconds.)

The symbol “b” or “B” indicates which picture’s TV channel or input source can be changed.

The symbol “9” indicates which picture’s sound is being received.

TV channel or input-source mode for the

ZOOM IN

or

LEFT RIGHT

— (white labeled button)

Press and hold either RIGHT or LEFT to zoom in on the selected picture.

Release at the desired size. The other picture will

ACTIVE

Press to select either the right or left picture in order to change the TV channel or video source using the white labeled buttons below. The symbol “b” (or “B”) will appear to indicate which picture’s channel or input mode can be changed.

76

Sub picture

main picture (It will dim in about 3 seconds.)

Main picture

be zoomed out simultaneously.

TV/VIDEO — (white labeled button)

Press repeatedly to scroll through the available video inputs for the picture on which the symbol “b” (or “B”) is displayed. (see “TV/VIDEO” on page 27)

32