Watching Digital TV

When you have connected the DTV receiver, you can enjoy digital TV programs. This projection TV is capable of receiving the 1080i, 720p, 480p and 480i digital TV formats.

Note:

This projection TV is not capable of displaying a 720p format signal as it is. When the 720p format signal is received, it is converted into a 480p format signal.

To view a digital TV program

1Connect the DTV receiver to VIDEO 5 (DTV) IN on the projection TV. (for details, see pages 13 and 12)

2Press TV/VIDEO to select VIDEO 5. The digital TV format being received is displayed on the screen for three seconds.

Note:

•You cannot select VIDEO 5 unless a DTV receiver is connected.

TV/VIDEO

DTV FORMAT : 480p

3Select a digital channel on the DTV receiver. For details, see the Operating Instructions of the DTV receiver.

4Adjust the volume on this projection TV.

Tip z

The optimum convergence alignment varies with digital TV formats. Whenever you find that the picture blurs, press FLASH FOCUS. (for details, see page 25)

Watching the Picture

in Wide Screen Mode

Automatically — AUTO

WIDE

When a 480i format signal with an ID-1 (16:9 aspect ratio recorded) signal is received, the projection TV automatically selects wide screen mode.

Notes:

•When the AUTO WIDE function does not work correctly due to the quality of signal, select wide screen mode manually. (see page 29)

•The AUTO WIDE function does not work when the following signals are received:

-480i format signal without an ID-1 (aspect ratio recorded) signal

-480p format signal

-720p/1080i format signals (The picture is always displayed in FULL mode)

Activating the AUTO WIDE function

Set AUTO WIDE in the WIDE SCREEN MODE menu to ON. (see page 40)

To deactivate the AUTO WIDE function

Set AUTO WIDE in the WIDE SCREEN MODE menu to OFF. (see page 40)

28