3Move the joystick up or down to select the speaker for volume adjustment and press .

;PRO-LOGIC

CENTER

REAR BALANCE TEST TONE :

Move SelectExitMENU

CENTER: Select to adjust the level of the center speaker. (not available for SRS 3D MONO)

REAR: Select to adjust the level of the rear speakers. (not available for ;3 STEREO)

BALANCE: Select to adjust the balance between the right and left speakers.

4Move the joystick up, down, left or right to adjust the volume level and press .

5Use the joystick to select other speakers and to adjust the volume levels.

Adjusting the speaker volume using the test tone

The TEST TONE feature makes it easier to adjust the volume level. You can use this feature for ;PRO LOGIC and ;3 STEREO modes only.

OFF

1With the SURROUND LEVEL window open, move the joystick up or down to select TEST TONE and press .

;PRO-LOGIC CENTER REAR BALANCE

TEST TONE :

OFF

Move SelectExitMENU

2Move the joystick up or down to select ON.

A test tone will be output from each speaker in sequence:

Front left tCenter tFront right tRear

To turn off the test tone, select OFF.

3Follow steps 2 through 4 in “Adjusting the speaker volume.”

Note:

You can adjust the volume using the test tone independent of the projection TV’s operation.

Using the TIMER Menu

TIMER

DAYLIGHT SAVING:

CURRENT TIME

ON / OFF TIMER

– – : – – A M

Move Select Exit MENU

After setting the clock you can use the timer to turn the projectionON TV on and off.

For detailed information on using the remote control to modify menu settings, refer to “Learning Menu Selection” on page 35.

To select the TIMER menu:
Display, Highlight

 

, Select

 

 

MENU

 

 

 

Tip z

Set daylight saving time before setting the clock. Any loss of power will cause these settings to be erased.

(continued)

(menus) UP SET Your Adjusting

39