Sony KP-57XBR10W, KP-65XBR10W Watching Two, Programs at One Time, — PIP, ” or, Main, about, ACTIVE, picture, POSITION, seconds.), be changed, will dim in, input-source, mode for the

Caution about continued wide screen mode usage for 4:3 aspect ratio pictures

This projection TV was designed primarily for viewing TV broadcasts in wide screen mode (16:9 aspect ratio pictures). Consistent and exclusive viewing of 4:3 aspect ratio programs in NORMAL mode will lead to permanent imprinting of the gray band on both sides of the picture.

Therefore, when you watch conventional 4:3 ratio TV programs, we recommend you select WIDE ZOOM mode by using WIDE MODE button.

Notes:

•Depending on the picture format, black bands may be present on the top and bottom of the screen.

•For ZOOM and WIDE ZOOM modes you can adjust the vertical position of the picture. (see “V CENTER” on page 41)

Watching Two

Programs at One Time

— PIP

The Picture-in-Picture (PIP) feature allows you to view two channels simultaneously, one in the full size “main” picture and one in a smaller “window” picture.

You can move the window picture to any location on the screen.

Note:

•The PIP feature is not available for the inputs from VIDEO 5 (DTV) IN.

The symbol “b” or	The symbol “9”
“B” indicates which	indicates which
picture’s TV channel	picture’s sound is
or input source can	being received.
be changed.		TV channel or
		input-source
Main	6	mode for the
picture	6	main picture (It
picture		main picture (It
		will dim in
		about 3
	10	seconds.)
		seconds.)
		TV channel or
		input-source
Window picture		mode for the

window picture (It will dim in about 3 seconds.)

Using the yellow labeled buttons for PIP operations

REFER TO THE ILLUSTRATION OF THE

REMOTE CONTROL ON THE INSIDE FRONT COVER OF THIS MANUAL AS YOU REVIEW THE FOLLOWING DESCRIPTION

Tip z

If you press RESET in PIP mode, the window picture will move to the bottom right (factory-preset location).

Press to display a window picture.

Each time you press this button, the picture size will change (1/4 t1/9 t1/16).

Press (OFF) to close the window picture.

POSITION

Press to change the location of the window picture (counterclockwise) around the main picture.

ACTIVE

Press to select either the main or window picture in order to change the TV channel or video source using the white labeled buttons below. The symbol “b” (or “B”) will appear to indicate which picture’s channel or input mode can be changed.