Switching on at Your Desired Time — On Timer
EJECTPOWER
MUTING | DISPLAY |
INPUT | TIMER REC |
SELECT | ON SCREEN ON/OFF CLEAR |
PICTURE | MENU |
MODE | |
| + |
| ENTER |
1 2 3
4 5 6
7 8 9
ON TIMER SLEEP | VOL PROGR |
You can preset your video TV to automatically switch on at a desired time. You can select the TV program or video playback to be switched on.
1Press MENU to display the main menu.
2Move the cursor to “ON TIMER SET” with +
or 
ON TIMER | SET | 2 0 : 0 0 |
|
| 2 4 . 1 1 SUN |
TIME | : 6 : 0 0 | |
SOURCE | : TV | PROG 1 |
ON TIMER : OFF |
| |
S e l e c t | a n d p r e s s ENTER |
3Press ENTER.
The timer setting hour section turns red.
EN
+ +
INDEX--
TRACKING
AUTO/
MANUAL
REC
COUNTER RESET
PAUSE SEARCH
PLAY
REWFF
STOP
4Set the hour with +
or 
5Set the minutes (by one minute) with +
or 
6Move the cursor to “SOURCE” with +
or 
7Select TV or VCR z (video playback) to be switched on with +
or 
When you select TV, select the program position with +
or 
ENTER.
ON TIMER | SET | 2 0 : 0 0 |
|
| 2 4 . 1 1 SUN |
TIME | : 7 : 3 0 | |
SOURCE | : TV | PROG 12 |
ON TIMER : OFF |
| |
S e l e c t | a n d p r e s s ENTER |
To erase the message
Press any button on the video TV or Remote Commander.
8Move the cursor to “ON TIMER” with +
or 
or 
The ON TIMER lamp on the front of the video TV lights up.
9Press MENU to go back to the original screen.
If you are not using the video TV, press POWER on the Remote Commander to set the video TV in standby mode.
At the preset time, the video TV automatically switches on and a message “Good morning” is displayed for five minutes.
If you do not press any button for 2 hours, the video TV automatically shuts off.
To cancel on timer function
1Press ON TIMER.
The ON TIMER SET menu appears.
2Press ON TIMER again to select OFF.
Additional Operations
31
