Sony KV-21FX30E, KV-21FX30B service manual Board PWB Removal Step, Service Position, Wire Dressing

2-5. A Board PWB Removal [ Step 1 ]

<= Remove screw.

Remove FBT <=

support bracket.

2-7. Service Position

Place the A Board PWB in the position indicated to carry out servicing.

2-6. A Board PWB Removal [ Step 2 ]

<=

Release the 2 securing clips located at either side of the chassis and slide the PWB clear of the bracket.

2-8. Wire Dressing

Ensure that all wires do not touch heat-sinks and high temperature hot spots. All wires must be kept at a minimum distance of 20mm away from the EHT lead.

13