3Audio control section
EJECT button (see qd in page 8)
1 AUDIO INPUT (AUTO/MANU/FIX) switch
2 AUDIO REC LEVEL control knob
1Monitor display section (see page 9)
Overview 1 Chapter
aAUDIO INPUT (AUTO/MANU/FIX) switch
Switches the audio recording level adjustment mode. AUTO : Adjusts AUDIO REC LEVEL
automatically. (Adjustment of AUDIO REC LEVEL control knobs 2 is disabled.)
For acceptable recording levels, see the table below.
AUDIO INPUT LEVEL | Acceptable level |
switch (page 16) | (max.) |
|
|
+18 dBu | |
|
|
+24 dBu | |
|
|
+4 | +30 dBu |
|
|
MANU : Enables the AUDIO REC LEVEL control knobs 2.
FIX : Fixes AUDIO REC LEVEL at the intermediate value. (Adjustment using the AUDIO REC LEVEL control knobs 2 is disabled.)
For acceptable recording levels, see the table below.
AUDIO INPUT LEVEL | Acceptable level |
switch (page 16) | (max.) |
|
|
+18 dBu | |
|
|
+24 dBu | |
|
|
+4 | +30 dBu |
|
|
Notes
•When i.LINK signals are input to the unit, the sound recorded retains the signal input level, regardless of the setting of this switch.
•Even when this switch is set to AUTO, the setting is not effective against a volume level which exceeds the dynamic range of the input amplifier.
•If you input a sound at a level that exceeds the acceptable range, the recorded sound is distorted.
bAUDIO REC LEVEL control knobs
Use these knobs to adjust the levels of the analog audio signals input to the unit for each channel.
These knobs are enabled only when the AUDIO INPUT (AUTO/MANU/FIX) switch 1 is set to MANU.
To display the audio level meters on the LCD monitor, press the STATUS CHECK button.
For details on the audio level meter, see “STATUS CHECK screen” on page 25.
Note
You cannot adjust the audio level using these knobs while i.LINK signals are input.
Chapter 1 Overview 13