Operating Menus

Menus Through Setting and Adjusting 5 Chapter

AUDIO SET menu

Icon/Menu

Submenu

Setting

 

AUDIO SET

AUDIO MODE

Selects the audio mode.

 

(page 49)

FS32K :

Switches the audio mode to 4-channel mode (12-bit mode).

 

 

BFS48K :

Switches the audio mode to 2-channel mode (16-bit mode). (This setting

 

 

 

 

 

records the sound in all audio ranges, providing a high-quality sound

 

 

 

 

 

recording.)

 

 

 

 

 

 

 

Notes

 

 

 

 

• You can set this menu when recording in DV format only.

 

 

• When signals are input from the HDV/DV jack, the audio mode of the signals to be

 

 

recorded is the same as that of the input signals.

 

 

• Recording performs automatically in [FS48K] mode in HDV format.

 

 

• You cannot change the current setting during recording.

 

 

• Noise may occur at the instant you switch the audio mode.

 

 

• When dubbing a sound source in DVCAM, select [FS32K].

 

 

 

 

 

 

AUDIO MONI

Sets the audio that is output from the i (phones) jack, the HDMI OUT jack and the speaker.

 

(page 25)

BCH1, CH2 : Outputs CH1 and CH2 audio to each channel.

 

 

CH1 :

Outputs CH1 audio to 1/2 channel.

 

 

CH2 :

Outputs CH2 audio to 1/2 channel.

 

 

 

 

 

 

Note

 

 

 

 

When the AUDIO OUTPUT SELECT switch is set to CH-3/4, [CH1] and [CH2] correspond to

 

 

[CH3] and [CH4], respectively. When it is set to MIX, [CH1] and [CH2] correspond to CH1/3

 

 

synthesized sound and CH2/4 synthesized sound, respectively.

 

 

 

 

 

 

AUDIO LOCK BUNLOCK MODE :Records the sampling clocks of audio and video independently. This

 

(page 49, 96)

 

 

 

mode applies to a consumer DV tape.

 

 

LOCK MODE : Synchronizes the sampling clocks of the audio and video for recording.

 

 

 

 

 

This setting is effective for digital processing and performs a clean

 

 

 

 

 

splice during the audio editing process.

 

 

 

 

 

 

Notes

 

 

 

 

• You can set this menu when recording in DV (SP) format only.

 

 

• When recording in HDV or DVCAM format, the menu is set to [LOCK MODE].

 

 

• During i.LINK input, the same setting as that of the input signal is selected, regardless of

 

 

this setting.

 

 

 

 

 

 

 

JOG AUDIO

Selects either to turn the sound output on or off when the tape is played at a speed other

 

(page 41)

than normal. (Available in DVCAM/DV format only.)

 

 

BOFF :

Does not output the sound when playing a tape at a speed other than

 

 

ON :

normal.

 

 

Outputs the sound when playing a tape at a speed other than normal.

 

 

 

 

 

 

Notes

 

 

•When a tape recorded in HDV format is played back, the sound cannot be output in various speeds.

•Even if you have set this item to ON, the sound may not be output or may be interrupted depending on the recording format or tape conditions.

76 Chapter 5 Adjusting and Setting Through Menus