Troubleshooting
Symptom | Cause/Remedy |
The output from the S VIDEO OUT jack | The output from the S VIDEO OUT jack and the VIDEO OUT jack is set as follows. |
and VIDEO OUT jack is different from the | • When the playback format of the unit is set as shown below and both the unit and |
[DOWN CONVERT] setting of [VIDEO | the other equipment connected using the HDV/DV jacks are powerd on, the |
OUT] in [IN/OUT REC]. | output from the S VIDEO OUT jack or VIDEO OUT jack is fixed to EDGE CROP. |
| Menu item | Setting | |
|
|
|
|
Playback format |
|
| HDV (HDV1080i) |
|
|
|
|
[VIDEO OUT] in |
| [DOWN CONVERT] | SQUEEZE or LETTER |
[IN/OUT REC] |
|
| BOX |
|
|
| |
| [HDMI/CMPNT] | 480p/480i, 576p/576i | |
|
| ||
|
|
|
|
[i.LINK SET] in |
| [HDV t DV CONV] | DVCAM or DV SP |
[IN/OUT REC] |
|
|
|
| [DOWN CONVERT] | Set to EDGE CROP | |
| |||
|
|
| |
|
|
|
|
•When the playback format of the unit is set as shown below and both the unit and the other equipment connected using the 
HDV/DV jacks are powerd on, the output from the S VIDEO OUT jack or VIDEO OUT jack is fixed to LETTER BOX.
| Menu item | Setting | |
|
|
|
|
Playback format |
|
| HDV (1080i or 720p) |
|
|
|
|
[VIDEO OUT] in |
| [HDMI/CMPNT] | 480i, 576i, 480p/480i, |
[IN/OUT REC] |
|
| 576p/576i |
|
|
| |
|
|
| |
[ALLSCAN MODE] in [DISPLAY SET] (page 75) | ON | ||
|
|
|
|
Maintenance 6 Chapter
Recording/Dubbing
Symptom | Cause/Remedy |
|
|
Whenever you connect the unit to an AC | • The TIMER switch is set to REC. |
outlet, the unit automatically starts | t When the TIMER switch is set to REC, the unit starts recording whenever the |
recording. | power is connected. Set the TIMER switch to OFF (page 7). |
|
|
Even though the KEY INH switch is set to | • The TIMER switch is set to REPEAT or REC. |
ON, the unit starts recording/playback by | t The TIMER switch setting has a higher priority than the KEY INH switch |
itself. | setting. Set the TIMER switch to OFF (page 7). |
| • When [COMMANDER] in the [OTHERS] menu is set to [WIRELESS], the unit |
| responds to signals from the Remote Commander even though the KEY INH |
| switch is set to ON. |
| t Set [COMMANDER] to [CONTROL S] (page 80). |
|
|
No picture is output via the HDV/DV | t Reconnect the i.LINK cable (not supplied). |
jack. | • INPUT SELECT switch is set to a position other than HDV/DV. |
| t Set the switch to HDV/DV (page 8). |
| t Set [HDV/DV SEL] in the [IN/OUT REC] menu correctly (page 70). |
|
|
88 | Chapter 6 Maintenance |